The Unidrive M100 family of drives provides basic, cost-effective motor control for induction motors. These run from 0.33 kW - 10 kW (0.33 - 10 hp) at 100V / 200V / 400V. M100 drives are among the smallest in their class; they are built compact to fit into almost any system and built durable enough to last in tough environments. An SD card may be used with an AI-Backup module or AI-Smart adapter for quick transfer of parameters. There are a few different modes on the drive that allow for power saving while still getting the most out of it. These modes include:

- Square law V/F mode - optimized for quadratic loads
- Dynamic V/F mode - keeps energy and motor losses at a minimum for low loads
- Standby mode - allows motor to idle for long periods

Showing 1 - 50 of 52 products

M100 Drives | Description | Stock Level |
---|---|---|

M100-01100017 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01100017 - 1.7 maximum continuous output current amps, 2.6 open loop peak current amps, 0.25 RFC current amps, 0.33 nominal power kW at 100 volts, 0.33 motor power horsepower at 100 volts, 100 to 120 volts. | Call For Stock |

M100-01100024 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01100024 - 2.4 maximum continuous output current amps, 3.6 open loop peak current amps, 0.37 RFC current amps, 0.5 nominal power kW at 100 volts, 0.5 motor power horsepower at 100 volts, 100 to 120 volts. | Call For Stock |

M100-01200017 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01200017 - 1.7 maximum continuous output current amps, 2.6 open loop peak current amps, 0.25 RFC current amps, 0.33 nominal power kW at 230 volts, 0.33 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-01200024 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01200024 - 2.4 maximum continuous output current amps, 3.6 open loop peak current amps, 0.37 RFC current amps, 0.5 nominal power kW at 230 volts, 0.5 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-01200033 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01200033 - 3.3 maximum continuous output current amps, 5 open loop peak current amps, 0.55 RFC current amps, 0.75 nominal power kW at 230 volts, 0.75 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-01200042 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01200042 - 4.2 maximum continuous output current amps, 6.3 open loop peak current amps, 0.75 RFC current amps, 1 nominal power kW at 230 volts, 1 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-02100042 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02100042 - 4.2 maximum continuous output current amps, 6.3 open loop peak current amps, 0.75 RFC current amps, 1 nominal power kW at 100 volts, 1 motor power horsepower at 100 volts, 100 to 120 volts. | Call For Stock |

M100-02100056 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02100056 - 5.6 maximum continuous output current amps, 8.4 open loop peak current amps, 1.1 RFC current amps, 1.5 nominal power kW at 100 volts, 1.5 motor power horsepower at 100 volts, 100 to 120 volts. | Call For Stock |

M100-02200024 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200024 - 2.4 maximum continuous output current amps, 3.6 open loop peak current amps, 0.37 RFC current amps, 0.5 nominal power kW at 230 volts, 0.5 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-02200033 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200033 - 3.3 maximum continuous output current amps, 5 open loop peak current amps, 0.55 RFC current amps, 0.75 nominal power kW at 230 volts, 0.75 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-02200042 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200042 - 4.2 maximum continuous output current amps, 6.3 open loop peak current amps, 0.75 RFC current amps, 1 nominal power kW at 230 volts, 1 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-02200056 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200056 - 5.6 maximum continuous output current amps, 8.4 open loop peak current amps, 1.1 RFC current amps, 1.5 nominal power kW at 230 volts, 1.5 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-02200075 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200075 - 7.5 maximum continuous output current amps, 11.3 open loop peak current amps, 1.5 RFC current amps, 2 nominal power kW at 230 volts, 2 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-02400013 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400013 - 1.3 maximum continuous output current amps, 2 open loop peak current amps, 0.37 RFC current amps, 0.5 nominal power kW at 400 volts, 0.5 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-02400018 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400018 - 1.8 maximum continuous output current amps, 2.7 open loop peak current amps, 0.55 RFC current amps, 0.75 nominal power kW at 400 volts, 0.75 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-02400023 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400023 - 2.3 maximum continuous output current amps, 3.5 open loop peak current amps, 0.75 RFC current amps, 1 nominal power kW at 400 volts, 1 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-02400032 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400032 - 3.2 maximum continuous output current amps, 4.8 open loop peak current amps, 1.1 RFC current amps, 1.5 nominal power kW at 400 volts, 1.5 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-02400041 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400041 - 4.1 maximum continuous output current amps, 6.2 open loop peak current amps, 1.5 RFC current amps, 2 nominal power kW at 400 volts, 2 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-03200100 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-03200100 - 10 maximum continuous output current amps, 15 open loop peak current amps, 2.2 RFC current amps, 3 nominal power kW at 230 volts, 3 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-03400056 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-03400056 - 5.6 maximum continuous output current amps, 8.4 open loop peak current amps, 2.2 RFC current amps, 3 nominal power kW at 400 volts, 3 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-03400073 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-03400073 - 7.3 maximum continuous output current amps, 11 open loop peak current amps, 3 RFC current amps, 3 nominal power kW at 400 volts, 3 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-03400094 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-03400094 - 9.4 maximum continuous output current amps, 14.1 open loop peak current amps, 4 RFC current amps, 5 nominal power kW at 400 volts, 5 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-04200133 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-04200133 - 13.3 maximum continuous output current amps, 20 open loop peak current amps, 3 RFC current amps, 3 nominal power kW at 230 volts, 3 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-04200176 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-04200176 - 17.6 maximum continuous output current amps, 26.4 open loop peak current amps, 4 RFC current amps, 5 nominal power kW at 230 volts, 5 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M100-04400135 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-04400135 - 13.5 maximum continuous output current amps, 20.3 open loop peak current amps, 5.5 RFC current amps, 7.5 nominal power kW at 400 volts, 7.5 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M100-04400170 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-04400170 - 17 maximum continuous output current amps, 25.5 open loop peak current amps, 7.5 RFC current amps, 10 nominal power kW at 400 volts, 10 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-01100017 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01100017 - 1.7 maximum continuous output current amps, 2.6 open loop peak current amps, 0.25 RFC current amps, 0.33 nominal power kW at 100 volts, 0.33 motor power horsepower at 100 volts, 100 to 120 volts. | Call For Stock |

M101-01100024 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01100024 - 2.4 maximum continuous output current amps, 3.6 open loop peak current amps, 0.37 RFC current amps, 0.5 nominal power kW at 100 volts, 0.5 motor power horsepower at 100 volts, 100 to 120 volts. | Call For Stock |

M101-01200017 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01200017 - 1.7 maximum continuous output current amps, 2.6 open loop peak current amps, 0.25 RFC current amps, 0.33 nominal power kW at 230 volts, 0.33 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-01200024 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01200024 - 2.4 maximum continuous output current amps, 3.6 open loop peak current amps, 0.37 RFC current amps, 0.5 nominal power kW at 230 volts, 0.5 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-01200033 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01200033 - 3.3 maximum continuous output current amps, 5 open loop peak current amps, 0.55 RFC current amps, 0.75 nominal power kW at 230 volts, 0.75 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-01200042 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-01200042 - 4.2 maximum continuous output current amps, 6.3 open loop peak current amps, 0.75 RFC current amps, 1 nominal power kW at 230 volts, 1 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-02100042 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02100042 - 4.2 maximum continuous output current amps, 6.3 open loop peak current amps, 0.75 RFC current amps, 1 nominal power kW at 100 volts, 1 motor power horsepower at 100 volts, 100 to 120 volts. | Call For Stock |

M101-02100056 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02100056 - 5.6 maximum continuous output current amps, 8.4 open loop peak current amps, 1.1 RFC current amps, 1.5 nominal power kW at 100 volts, 1.5 motor power horsepower at 100 volts, 100 to 120 volts. | Call For Stock |

M101-02200024 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200024 - 2.4 maximum continuous output current amps, 3.6 open loop peak current amps, 0.37 RFC current amps, 0.5 nominal power kW at 230 volts, 0.5 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-02200033 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200033 - 3.3 maximum continuous output current amps, 5 open loop peak current amps, 0.55 RFC current amps, 0.75 nominal power kW at 230 volts, 0.75 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-02200042 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200042 - 4.2 maximum continuous output current amps, 6.3 open loop peak current amps, 0.75 RFC current amps, 1 nominal power kW at 230 volts, 1 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-02200056 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200056 - 5.6 maximum continuous output current amps, 8.4 open loop peak current amps, 1.1 RFC current amps, 1.5 nominal power kW at 230 volts, 1.5 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-02200075 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02200075 - 7.5 maximum continuous output current amps, 11.3 open loop peak current amps, 1.5 RFC current amps, 2 nominal power kW at 230 volts, 2 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-02400013 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400013 - 1.3 maximum continuous output current amps, 2 open loop peak current amps, 0.37 RFC current amps, 0.5 nominal power kW at 400 volts, 0.5 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-02400018 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400018 - 1.8 maximum continuous output current amps, 2.7 open loop peak current amps, 0.55 RFC current amps, 0.75 nominal power kW at 400 volts, 0.75 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-02400023 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400023 - 2.3 maximum continuous output current amps, 3.5 open loop peak current amps, 0.75 RFC current amps, 1 nominal power kW at 400 volts, 1 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-02400032 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400032 - 3.2 maximum continuous output current amps, 4.8 open loop peak current amps, 1.1 RFC current amps, 1.5 nominal power kW at 400 volts, 1.5 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-02400041 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-02400041 - 4.1 maximum continuous output current amps, 6.2 open loop peak current amps, 1.5 RFC current amps, 2 nominal power kW at 400 volts, 2 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-03200100 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-03200100 - 10 maximum continuous output current amps, 15 open loop peak current amps, 2.2 RFC current amps, 3 nominal power kW at 230 volts, 3 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-03400056 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-03400056 - 5.6 maximum continuous output current amps, 8.4 open loop peak current amps, 2.2 RFC current amps, 3 nominal power kW at 400 volts, 3 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-03400073 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-03400073 - 7.3 maximum continuous output current amps, 11 open loop peak current amps, 3 RFC current amps, 3 nominal power kW at 400 volts, 3 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-03400094 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-03400094 - 9.4 maximum continuous output current amps, 14.1 open loop peak current amps, 4 RFC current amps, 5 nominal power kW at 400 volts, 5 motor power horsepower at 400 volts, 380 to 480 volts. | Call For Stock |

M101-04200133 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-04200133 - 13.3 maximum continuous output current amps, 20 open loop peak current amps, 3 RFC current amps, 3 nominal power kW at 230 volts, 3 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |

M101-04200176 | Control Techniques M100 Drives Variable Speed AC drive for induction motors M100-04200176 - 17.6 maximum continuous output current amps, 26.4 open loop peak current amps, 4 RFC current amps, 5 nominal power kW at 230 volts, 5 motor power horsepower at 230 volts, 200 to 240 volts. | Call For Stock |